ZONSKY products & services

Wire and Cable

Heat Release Rate Tester for Cables ZY6260 – Evaluates peak heat, total emission, and ignition time according to EN 50575, EN 50399 and GA/T 716

Wire and Cable

Vertical Flame Tester – Automated flame resistance test on cables according to UL 1581 and UL 2556

Wire and Cable

Toxicity Index Tester – Evaluates toxic gases in cables and polymers according to EN 50305:2020

Wire and Cable

Thermal Stability Test Apparatus for PVC compounds – Measures heat resistance and decomposition according to IEC 60811-3-2

Wire and Cable

Steiner UL 910 Horizontal Tunnel Furnace – Flame Propagation and Smoke Density Test System for CMP Cables and Air Ducts

Wire and Cable

Salt Spray Test Chamber – Automated corrosion tester for coatings and components according to DIN50021 standard

Wire and Cable

Oil Resistance Testing Machine for Rubber and Cable Insulation – Exposure to industrial oils according to IEC 60332, UL 1581, BS 4066

Wire and Cable

Optical Cable Flexion Tester – Applies multidirectional bending stress according to IEC 60794-1-2:2003

Wire and Cable

Bending Test Apparatus for Mineral Insulated Cables – Simulation of repeated operational bending according to IEC 60702-1, IEC 60684-2, BS 6387, BS 8491

Wire and Cable

Magnetic Core Load Tester – Strength and weight distribution test on soft copper-coated wires according to IEC 60227-1 and IEC 60227-2

Wire and Cable

Low Temperature Tensile Tester – Testing of mechanical integrity and flexibility in cables and insulations according to IEC 60811-4-1

Wire and Cable

Impact Testing Machine for Mining Cables – Simulation of impacts, drops and crushing according to IEC 60079-14 and IEC 60079-17

Wire and Cable

High Voltage Test Equipment – Diagnostic System for High Voltage Cabling according to IEC 60060-1

Wire and Cable

Heat Deformation Tester – Test for softening and elongation of cable insulation according to UL 2556 and UL 758

Wire and Cable

Cable Flattening Testing Machine – Crush resistance according to IEC 60702-1:2002

Wire and Cable

Flexion Tester for Energy Chain Cable – Simulation of continuous industrial movement according to TUV 2PFG2577, DIN VDE 0295, CRIA 0003.2

Wire and Cable

Circuit Integrity Apparatus under Fire – Severe fire simulation according to IEC 60331 (750°C – 830°C)

Wire and Cable

Carbon Black Content Tester – Analysis by pyrolysis and gravimetry according to IEC 60811-4-1, ASTM D 2671, ISO 6722

Wire and Cable

Cable Sheath Abrasion Tester – Simulation of friction and scratching according to IEC 60811-1-4, ASTM D2303, ISO 188

Wire and Cable

Cable Flexing Tester – Continuous flexing stress simulation according to IEC 60227-3, VDE 0281-3, BS EN 50525-2-31

Wire and Cable

Cable Flattening Tester – 2-ton Compression Test for Insulated Mineral Cables per IEC 60702-1

Wire and Cable

Fatigue Testing Machine for Cable Carriers – Bending and durability tests for high-flexibility cables according to TUV 2PFG 2577

Wire and Cable

Cable Combustion Test Equipment – Tester for wires and cables per UL 1581 (Vertical, FT1, VW-1, FT2)

Wire and Cable

Vertical Flame Propagation Tester for Bunched Cables – Equipment according to IEC 60332-3-10:2018

Wire and Cable

3-Meter Cube Smoke Density Tester – Equipment for smoke measurement according to IEC 61034, BS 6853, BS 6724

Fire Fighting

Fire Hose Testing Device – Leak tightness and pressure retention tests according to DIN 14521, NF S61-820

Fire Fighting

Fire Hose Pressure Test Bench – Resistance, durability and watertightness testing according to ISO 6182-6, EN 14540, NFPA 1961

Fire Fighting

Vibration Test Equipment for Fire Extinguishers – Durability and structural integrity tests according to ISO 7165:2009

Fire Fighting

Fire Extinguisher Testing Equipment – Extinguishing test for Class A and B fires according to ISO 7165, ISO 11601 and GB4066-2017

Fire Fighting

Fire Extinguisher Impact Tester – Drop equipment for durability and structural resistance testing according to DIN 14521 and NF S61-820